i am just starting a new project on removing of mercaptans (3000 ppmv) from gas. i am unaware of the processes that can help to remove the mercaptans. can someone help me?
thanx for the reply sp77. yes, the gas stream will have H2S and in range of 35-50 ppmv. In reality I will not be able to remove all the mercaptans but if we can reach as low 3-4 ppmv that will probably acceptable as per california rules and regulations. hope you will be able to shred some light on this.
once again thanks for answering. i am hoping to hear from you soon.
Reducing a mercaptan stream from 3000 to 3 or 4 ppmv is a tall order, especially since H2S makes up less than 50 ppmv out of the 3000. For this kind of efficiency, your best bet may be oxidation (say with RTO), followed by a wet scrubber to take out the resulting SO2 with a base.