Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rigid PVC sheet line shrinkage issue need HELP

Status
Not open for further replies.

Bilz123

Industrial
Feb 25, 2019
1
We bought a used AMUT rigid pvc sheet line for blisters and we are having an issue with shrinkage in machine direction which is more than 10 percent and since we are new in this field we are unable to solve this problem.
If anyone can help me in this regard.
Thanks!!
 
Replies continue below

Recommended for you

If you want any useful answers you need to provide more information. How and where are you observing (measuring)this shrinkage and what problems is it causing.
 
Sounds like too much wind up tension that imparts excessive orientation to the sheet.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor