Jun 19, 2017 #1 kill0054 Industrial Aug 13, 2015 5 I ahve spool under section 1/B31.1 design data, what should i put for applicable code & what code stamp should I use?
I ahve spool under section 1/B31.1 design data, what should i put for applicable code & what code stamp should I use?
Jun 19, 2017 #2 mk3223 Mechanical Feb 4, 2006 1,488 May look at the sketches of the Fig.100.1.2 in B31.1 and decide which the proper code stamps, i.e. "S", "A", or "PP", for your application. Also refer to the thread794-395346 for additional info. Hope it helps. Upvote 0 Downvote
May look at the sketches of the Fig.100.1.2 in B31.1 and decide which the proper code stamps, i.e. "S", "A", or "PP", for your application. Also refer to the thread794-395346 for additional info. Hope it helps.
Jun 19, 2017 Thread starter #3 kill0054 Industrial Aug 13, 2015 5 thank you. I am not engineer so don't know much about it. I think I will "PP" thought. Upvote 0 Downvote
Jun 21, 2017 #4 oknow Mechanical Mar 17, 2010 116 Suggest you discuss with your AIA. Upvote 0 Downvote
