msboobathi
Structural
I am desiginging a steel building above concrete building . While analysing i m getting more drift due t seismic loads. What is the appropriate way to model this.
Regards
M.S.B
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Seismic Analysis
- Thread starter msboobathi
- Start date
- Status
I am desiginging a steel building above concrete building . While analysing i m getting more drift due t seismic loads. What is the appropriate way to model this.
Regards
M.S.B
JasonMcKee71
Structural
You shall model the entire structure incl. concrete and steel parts. Drifts will be larger in the steel structure as it is not that stiff as the comcrete one. Maybe some bracing would help.
Jason McKee
proud R&D Manager of
Cross Section Analysis & Design
Software for the structural design of cross sections
Moment Curvature Analysis
Interaction Diagrams
Reinforcement Design etc.
Jason McKee
proud R&D Manager of
Cross Section Analysis & Design
Software for the structural design of cross sections
Moment Curvature Analysis
Interaction Diagrams
Reinforcement Design etc.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question