Hi everybody! I am not teacher. i am studying siemens NX, i want to make the videos about NX command. May be it is help full for beginner.
These video don't use for old member.
Please, see and give me some advice.
1: Mesh surface group.
1.1 ruled command ->
1.2 through curves command->
1.3 through curve mesh command -->
1.4 N Sided Surface command ->
These video don't use for old member.
Please, see and give me some advice.
1: Mesh surface group.
1.1 ruled command ->
1.2 through curves command->
1.3 through curve mesh command -->
1.4 N Sided Surface command ->
