Shaded View Plotting undesired results 1

[CCD429]

Just wondering if anyone here has seen a similar issue before.

When I "plot" 3d shaded views the graphics become jagged and torn.

When I export as PDF or "print" to the plotter there is not problem.

The plotter I am using is an HP T770

http://files.engineering.com/getfil...bba37a4e23b0&file=IMG_20151202_112426_028.jpg

 

[jerry1423]

Have you tried plotting a shaded image to the Hp1170 from a different source other than NX ?

 

[CCD429]

Thanks Jerry

NX is the only CAD software I have available.

What would you recommend?

 

[cowski]

In the plot dialog -> settings -> drawing sheet, what "image resolution" setting did you use?

If you used "draft" or "low", try bumping it up to "medium" or "high".

www.nxjournaling.com

 

[CCD429]

Cowski, Thanks!

This setting was already on High, but by changing it to Draft the graphics print correctly.