Sheet body in drafting

[Trent5791]

I've created some sheet bodies in my model but they do not appear in my drawing. Is there a setting I can change so I can see the sheet bodies in the drawing?

Thank you,
Trent
NX 9.0.3.4

 

[JohnRBaker]

Make sure that they've been properly added to the 'Model' Reference Set.

John R. Baker, P.E. (ret)
EX-Product 'Evangelist'
Irvine, CA
Siemens PLM:
UG/NX Museum:

The secret of life is not finding someone to live with
It's finding someone you can't live without

 

[Trent5791]

John,
How do I do that?
Thank you,

Thank you,
Trent
NX 9.0.3.4

 

[NutAce]

Switch to modeling in your 3D Item.

Got to;

Menu - Format - Reference sets

From the menu select the Model reference set (All geometry already in there will highlight) and select the sheets to be added.

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2

Building new PLM environment from Scratch using NX11 / TC11

 

[Trent5791]

The sheet bodies were already in there. So that wasn't it. Turns out, they were on a layer that wasn't visible in the drawing. I moved them to layer 1 and that fixed it.

Thank you,
Trent
NX 9.0.3.4