Mar 15, 2006 #2 MikeHalloran Mechanical Aug 29, 2003 14,450 Build a smaller object within, from the common face, and subtract it. Mike Halloran Pembroke Pines, FL, USA Upvote 0 Downvote
Build a smaller object within, from the common face, and subtract it. Mike Halloran Pembroke Pines, FL, USA
Mar 16, 2006 #3 TCARPENTER1 Computer Sep 22, 2005 234 Hi bearisle, Use the Solidedit command-> Body option then the Shell option - follow the prompts. HTH Todd Upvote 0 Downvote
Hi bearisle, Use the Solidedit command-> Body option then the Shell option - follow the prompts. HTH Todd
Mar 16, 2006 Thread starter #4 bearisle Mechanical Jun 2, 2004 77 Thanks Carpenter...I had figured it out....I was doing exactly as you described, but was not selecting the face properly when removing it (I was selecting a corner which removed 2 faces). Upvote 0 Downvote
Thanks Carpenter...I had figured it out....I was doing exactly as you described, but was not selecting the face properly when removing it (I was selecting a corner which removed 2 faces).
