Siemens NX Drafting - Size vs Size2D

[KVartusa]

In NX Drafting what is the difference between "Size2D" and just "Size" drawing? For ex.: Drawing-A1-Size-template and Drawing-A1-Size2D-template (in UGII\Templates folder).

 

[jerry1423]

What version of NX are you on ?

 

[Arkance/PhoeNX]

The files are the same as far as I recall. The difference is that the Size templates are used when you use File -> New -> Drawing, the Size2D are used when you already have a drawing and you add a new sheet to that drawing file.


Anthony Galante
Senior Support Engineer


NX3 to NX10 with almost every MR (29versions)

 

[KVartusa]

NX 10 ... If PhoeNX's answer is valid than thanks!

 

[MFDO]

If I’m not mistaken, X-Size_template is for Master Model Drawings and X-Size2D_template is for Non-MM drawings (Drawing Embedded in Parts).

Michael Fernando (CSWE)

http://www.solidCADworks.com

Tool and Die Designer
Siemens NX V10.0 + PDW
SWX 2013 SP3.0 X64
PDMWorks 2013
Logopress3
FastForm Advance
FormatWorks