Single shear plates loaded with axial+shear force

[azral]

Is there any example of single shear plate design in connections such as vertical bracings or axially loaded beams where beam to column connection is shear plate?

 

[ChipB]

If I remember correctly, there are a few in AISC's "Hollow Structural Sections Connections Manual"

 

[azral]

There are few, you are right-but examples are for shear OR axially loaded plates, not when forces actually act together.

 

[nutte]

I don't believe there are any in the HSS Connections
Manual, but I'm certain there is at least one in the Seismic Design Manual.

 

[slickdeals]

Yes, See Example 5.2 in the Seismic Design Manual (Page 5-11 in the 3rd Edition)

 

[newbiengineer]

attached is a sample calcs.. for some reason it doesnt allow shear plate.. i use single clip angle instead..
you may follow it from there..

 

[azral]

Thank you all for answers.
I've ordered Seismic Design Manual, but it will arrive in two to three weeks!
In meantime, can I design the shear plate first for shear and than for axial load, is my plate going to be underdesigned ot overdesigned?