Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sizing an Incline Shaft Winch

Status
Not open for further replies.
erikbecks

erikbecks

Mining
Nov 5, 2007
12
I need to determine what size winch will be needed to hoist ore from an incline shaft. The dimensions are 63m rise, 121m run, 27.5 degree incline giving 136m shaft. We are looking to produce 250tpd with side tipping skips. 1 and 2 wmt skips available. Open to other options.

Cheers

 
Status
Not open for further replies.

Similar threads

Pranav4312
  • Locked
  • Question
Geometry/Grade Distribution of any coal mine
Replies
1
Views
632
horacio Torres
horacio Torres
oldestguy
  • Locked
  • Question
Help another poster on shaft design
Replies
0
Views
123
oldestguy
oldestguy
cheme2016
  • Locked
  • Question
Dust Collector Sizing
Replies
1
Views
144
miningman
miningman
jarimasen
  • Locked
  • Question
HELP! on fleet angle from 2nd layer in flat drum
Replies
1
Views
186
miningman
miningman
yuvalk
  • Locked
  • Question
Anti Idle Technology - Has anybody have expiriance with SIGMA?
Replies
0
Views
149
yuvalk
yuvalk

Part and Inventory Search

Sponsor

Back
Top Bottom