SMT compression connector .050 pitch - Who makes em'?

[winkler]

Hello everyone. I'll ask here too.

Searching for compression connector and spring finger connector on the web returned surprisingly poor results. I would like a few manufacturer names of .050 pitch surface mount compression connectors that are able to withstand high vibration and shock. Board spacing of 6mm. I found a Teledyne web page. Any other vendors?

advTHANKSance

Winkler

 

[Jimttx]

Molex is one possible source. Check the following web site:

http://www.molex.com/cgi-bin/bv/mol...98@@@@&BV_EngineID=dadcedkelmfjbekgchecfclk.0

Or just go to

http://www.molex.com.

 

[yesway]

Hi Winkler!

You probably know of JST already, anyways they make lots of connectors, may be worth checking if not already done:

http://www.jst.com

best regards

 

[SteveSmith]

Have you tried Samtec?

http://www.samtec.com

Steve Smith
Product Engineer
Staco Energy Products Co.

http://www.stacoenergy.com