May 20, 2005 #1 tar Mechanical Jan 30, 2002 15 0 0 US Anybody know how I can get SW to generate a spline curve from an excell table of XY coordinates. I've done a motion analysis of a mechanism with COSMOS Motion and generated a trace path which I want to use in a SW sketch. Thanks Tom
Anybody know how I can get SW to generate a spline curve from an excell table of XY coordinates. I've done a motion analysis of a mechanism with COSMOS Motion and generated a trace path which I want to use in a SW sketch. Thanks Tom
May 20, 2005 #2 SBaugh Mechanical Mar 6, 2001 6,684 0 0 US Curve through XYZ points - under the curve toolbar. See the help on this. I will explain how you have to setup the excel file. No headers allowed (e.g. - X, Y, Z) Regards, Scott Baugh, CSWP 3DVision Technologies http://www.3dvisiontech.comhttp://www.scottjbaugh.comfaq731-376 faq559-716 - SW Fora Users Upvote 0 Downvote
Curve through XYZ points - under the curve toolbar. See the help on this. I will explain how you have to setup the excel file. No headers allowed (e.g. - X, Y, Z) Regards, Scott Baugh, CSWP 3DVision Technologies http://www.3dvisiontech.comhttp://www.scottjbaugh.comfaq731-376 faq559-716 - SW Fora Users
May 20, 2005 Thread starter #3 tar Mechanical Jan 30, 2002 15 0 0 US Thanks Scott... You Da MAN!!! Upvote 0 Downvote