Standard Fastener Dimensions - Screw Sizes

[courtl]

Please could someone point me in the right direction....?

A little while ago I used to have an A4 sheet which gave different screw head types and the basic dimensions. It also gave the dimensions for nuts and spring washers etc.

However as happens to all useful bits of paper it got 'misplaced' and I don't know where to find another.

The type of screws I am talking about are Pan Head, Cheese Head etc, nothing spectacular. I have tried looking on the internet but can't find anything.

Can anyone help?

Many Thanks

Linda

 

[unclesyd]

Here is one that will get you started. My link to screw and nut dimensions is dead.

http://www.smithfast.com/pantapping.html

 

[unclesyd]

I forgot to add go to the TOC and check their list for screw and things.

 

[courtl]

Thanks for the help.

Please excuse my ignorance in these things but what is TOC?

 

[IFRs]

Table of Contents

 

[ewh]

Another place to look would be the Machinery's Handbook.

 

[DTW]

McMaster-Carr has tables that give dimensions on most screws they carry.

 

[Binary]

McM-C also has 2D & 3D drawing/models of standard fasteners...

 

[courtl]

Thanks for everyones suggestions! I think I can go and 're-buid' my useful sheet of A4 now!