Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Sulfuric Acid Storage

Status
Not open for further replies.

nicolai

Mechanical
Sep 27, 2000
42
0
0
NA
Hi Folks

possible to direct me to the applicable codes and guidelines regarding bulk outdoor storage of Sulfuric Acid (98%)

many thanks
 
Replies continue below

Recommended for you

1. Are you in the USA?

2. Do you have a code or standard you have to meet?

3. Type of container, average quantity per container

 
Explain why your question was posted in the "NFPA fire Code Issues" forum ?

Will you be using Sulfuric Acid in fire protection in some way ???

MJCronin
Sr. Process Engineer
 
Thks MJcronin
I want to establish the good practice and regulations regarding the storage of bulk sulfuric acid from an fire prevention & protection perspective

 
Thanks LCREP
is did reviewed FM 7-111F

they dont mention any special fire measure like sprinklers for bulk storage tanks ( i.e 50 m³)

perhaps not a prerequisite for sulfuric acid

my concern is overpressure and subsequent release in case of fire
 
I think section 2.4.5.2 regarding vacuum breakers, hydrogen gas detection and high level alarms are definitely things to consider. Again they are trying to limit a loss $$ by early intervention.

 
I take this is not in the USA?

Suggest get a Fire Protection Engineer that deals with Hazardous Materials

There is to many questions, to get a good answer here
 
Status
Not open for further replies.
Back
Top