TEM EVO Control System 1

[Md. Mizanur Rahman]

Can any one tell me why ZA Read Telegram Fault occur on MWM TEM Evo sysem? Is there any precaution of this fault?
Please Help me........

 

[Hoxton]

why not ask mwm?

 

[Md. Mizanur Rahman]

Hello Hoxton. How are you? Do you know anything about this.

1. Is it a data communication problem? or
2. Is it for hardware problem? or
3. Is it for software problem?
Please let me know. It will be very helpful for me......

 

[Hoxton]

I cannot find the document I need, but I think it is a communication fault.

The TEM, like many controllers can either run the genset itself, at a fixed power level, or take power commands from a higher-level controller via a Modbus link. If there is an error in the data exchange, then I think this is the fault.

There should be a number code for each fault, there will be a table of codes in the manual, which should help you track it down.

 

[Md. Mizanur Rahman]

Hi Hoxton,
You are really very helpful Sir. Many many thanks for your replay......