Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Test for sanitary and fire fighting system

Status
Not open for further replies.

mechanicblues

Mechanical
Feb 12, 2007
25
Hi All,

We are preparing a construction contract of a shopping mall. We must provide a test program in the contract. I need information on what tests regarding sanitary and fire fighting system must be conducted and the phases of tests. I mean during installation, taking over and after completion.

Thanks
 
Replies continue below

Recommended for you

Any standard CSI specs will have this. You'll need these:
DIVISION 2 - SITE WORK
02311 TV Inspection of Pipelines ( Existing )
02312 TV Inspection of Pipelines ( New )
02610 Sanitary Sewer Pipe
02615 Water Mains
02640 Valves and Fire Hydrants
02642 Water Service Connections
02650 Tied Joint Restraint System
02651 Sewer and Manhole Testing
02653 Testing and Disinfection Water Mains


Engineering is the practice of the art of science - Steve
 
Don't forget to always check with Authorities Having Jurisdiction. There may be local ordinances/codes in addition to prevailing code (IPC, NSPC, etc.). Good to touch base and start a rapport with the code official anyway.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor