Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

three phase motor rotation 1

Status
Not open for further replies.

pluto

Electrical
Aug 3, 2003
1
0
0
US
Can you change rotation on a three phase electric motor by reversing any two of the three motor wire connections?
 
Replies continue below

Recommended for you

The three phases are typically labled ABC and the rotation is determined by the phase sequence...A-B-C. If you swap two (any two, just two)the sequence reverses...C-B-A.
 
P,

Swapping any two of the incoming phases will certainly reverse the direction of rotation however as advised by others here you need to firstly ensure the motor and load are designed for both forward & reverse rotation. The nature of the cooling fan in some motors is such that it only provides adequate cooling when operated in a specific direction, normally signalled by an 'arrow' on the fan cowling.

More importantly however is the load. Some driven machines, for example pumps, fans and compressors can be damaged beyond repair if they are driven in the wrong diection. Take note before making any changes.

Regards,
GGOSS
 
Status
Not open for further replies.
Back
Top