Tolerance stack analysis resources on net 4

[sheevaraam]

Hi Everybody,

Can you guys point me to some good resources on the net for tolerance stack analysis. Also are there any good books available for the same.

Greatly appreciate all answers. Thanks to everyone who answers in advance!

Thank you,
Siva

 

[KENAT]

Do a look on this site. I'm pretty sure I posted an excel spreadsheet that does tol stacks and some simple statistical calcs. This is in addition to the one I posted for hole positions.

KENAT,

Have you reminded yourself of faq731-376 recently, or taken a look at posting policies:

http://eng-tips.com/market.cfm?

What is Engineering anyway: faq1088-1484

 

[ctopher]

Try here also:

http://www.tec-ease.com/tolerance-stacks.htm

Chris
SolidWorks 09, CATIA V5
ctopher's home
SolidWorks Legion

 

[ctopher]

Lots of info online.

http://cr4.globalspec.com/thread/3295

Also attached.

Chris
SolidWorks 09, CATIA V5
ctopher's home
SolidWorks Legion

 

[sheevaraam]

Thanks Kenat and Chris, really appreciate it!

 

[axym]

The best book I've seen is

Mechanical Tolerance Stackup and Analysis
Bryan R. Fischer
ISBN: 0-8247-5379-8


Evan Janeshewski

Axymetrix Quality Engineering Inc.

http://www.axymetrix.ca

 

[ShaggyPE]

Here are some sites I have come across through the years:

http://www.mitcalc.com/

http://home.eol.ca/~hgibson/tolerances/

http://www.engineersedge.com/calculators.htm

http://www.engineersedge.com/floating_fastener.htm

-Dustin
Professional Engineer
Certified SolidWorks Professional
Certified COSMOSWorks Designer Specialist
Certified SolidWorks Advanced Sheet Metal Specialist