Jan 8, 2002 #1 2civil Civil/Environmental Apr 16, 2002 9 US Looking for a way to check the turning radius and sweep path of a semi-tractor in reverse. The templates I have, I've been told, are only for forward movements. Thanks.
Looking for a way to check the turning radius and sweep path of a semi-tractor in reverse. The templates I have, I've been told, are only for forward movements. Thanks.
Jan 10, 2002 #2 Imagineer Structural Dec 18, 1999 157 US I highly recommend AutoTURN by Transoft. Imagineer Upvote 0 Downvote
Jan 22, 2002 1 #4 Gabes Civil/Environmental Jan 17, 2002 4 US If you can drive it forward, you can drive it back. That said AutoTurn is pretty slick. Upvote 0 Downvote
Jan 24, 2002 #5 ejrandall Civil/Environmental Nov 27, 2000 4 US Another good program is AutoTrack. (http://www.savoy.co.uk) Very easy to use, and a wide range of design vehicles. Cheaper (by about half) than AutoTurn. Upvote 0 Downvote
Another good program is AutoTrack. (http://www.savoy.co.uk) Very easy to use, and a wide range of design vehicles. Cheaper (by about half) than AutoTurn.