UGZIPC 1

[phillpd]

Is there a version of this available for NX9 ?

NX 9.0.3.4
NX 10 (Testing)
Windows 7 64 (Windows 8.1 Tablet)

 

[Arkance/PhoeNX]

The attached one is the same 64bit one I've been using for a while.
I just tested in NX9 and it works as expected.
There's an image in the zip to show where the menu edit puts the option.


Anthony Galante
Senior Support Engineer

NX5.0.6, NX6.0.5, NX7.5.5, NX8.0.0 -> NX8.0.3
NX8.5.0 -> NX8.5.3, NX9.0.0 -> NX9.0.2, NX10 Beta

 

[JohnRBaker]

Attached are copies of the latest versions of teh UGZip utility (with NX 9.0 you'll need to use the 64-bit version). After downloading the file, edit the extension changing it from .zipper to .zip and then extracting the folder containing the files and the instructions for installing them.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[phillpd]

Thanks for the ZIP files.

Having issues though ... When I select "Work Part", the loaded part isn't being added to the UI.

Any suggestions ?

NX 9.0.3.4
NX 10 (Testing)
Windows 7 64 (Windows 8.1 Tablet)

 

[Arkance/PhoeNX]

Can't explain that, it works for me.


Anthony Galante
Senior Support Engineer

NX5.0.6, NX6.0.5, NX7.5.5, NX8.0.0 -> NX8.0.3
NX8.5.0 -> NX8.5.3, NX9.0.0 -> NX9.0.2, NX10 Beta

 

[paverte]

Hi Anthony/John
I installed your ugzipc as per the instructions. Got the menu item "Zip Assembly..." as expected.
When I clcik on it I get the following error message (from log);
##########################################################################################
The reason C:\universal\user_defaults\application\ugzipc_win64.dll failed to load was:
Cannot load image C:\universal\user_defaults\application\ugzipc_win64.dll
The specified procedure could not be found.

&MACRO FOCUS CHANGE OUT 1
&MACRO FOCUS CHANGE IN 1
&MACRO MESSAGE_BOX -2 Failed to load image - see log file for details
&MACRO MESSAGE_TEXT File name: C:\universal\user_defaults\application\ugzipc_win64.dll
&MACRO MESSAGE_TEXT Function name: ufusr
&MACRO MESSAGE_TEXT
MB_CBS_TERMINATED - pre/post callback execution terminated when action, ugzipc_win64.dll, returned status Error-
##########################################################################################
I've set the "UGII_USER_DIR=C:\universal\user_defaults"
Any Ideas? regards Paul

 

[JohnRBaker]

Did you put the 'ugzipc.men' file in the 'Startup' folder and the 'ugzipc.dlg' file as well as the 'ugzipc_win64.dll' file in the 'Application' folder?

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[studiotreccani]

I have the problem, that the files with long name aren't included into the zip file.
is the same for you?

regards

NX 7.5

http://www.studiotreccani.com

 

[paverte]

Hi John
Yes I have put the correct files in the startup and applications folder
Any other ideas?

regards
Paul

 

[JohnRBaker]

That's all I can add to this as that's what I did and it works.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[paverte]

All
Is there a way to have ugzipc read a path that is longer than the standard 86 characters?
regards
Paul

 

[Dave K]

UGzip doesn't function the same way in a managed mode, so I have submitted ER 7216125. Jump on board, if you think it would be useful.

-Dave

NX 9, Teamcenter 10