Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Unknown line on round bar surface

Status
Not open for further replies.
Replies continue below

Recommended for you

This looks to be hot finished bar. That line is from the hot rolling tooling.
Have you tried to grind or turn a sample to see if it has depth? I doubt that it is a lapp or seam.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy
 
Ditto. Not much to see here.

"Everyone is entitled to their own opinions, but they are not entitled to their own facts."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor