Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Vintage Volpar dwgs??

Status
Not open for further replies.

JQCF1

Structural
Aug 10, 2005
50
I'm chasing details of an STC SA3458WE that refs Volpar drawing list 5300, rev B of 6/28/77.
Can anybody help in my search? To my recollection Volpar is long in the history books. Any source of Volpar dwgs?
Thanks for any comments.
John Q.
 
Replies continue below

Recommended for you

Volpar collaborated with Beech-craft on STCs for the beech 18
Beech is now Raytheon.
What is the STC on? If it is a Beech-craft, Raytheon may be able to help you.
B.E.
 
Volpar did so many mods to the twin beech, it was almost unrecognizable, Tricycle gear, turbine engines, removing the double vert stab, and installing a conventional one, long, extended nose for baggage, spar straps,and probably ones I've never heard of. They were located at the Van Nuys airport. You might lurk here:

 
JQCF1,
I think you may have a hard time with this one, I just looked up the STC, it is an approval for a camera hole in a Cessna 421.
Volpar got taken over by the Gaylord corporation A Swiss company.
I would suggest finding a 421 that has been modified and seeing if they have the drawings in their paperwork.And if they, will, let you have a look at them.
B.E.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor