Oct 10, 2004 #1 sageman Industrial Feb 25, 2003 6 Produced a sketch in 3d, and I want to extruded cut the sketch but the tool is not lit or highlighted to show that it is active. Anyone?
Produced a sketch in 3d, and I want to extruded cut the sketch but the tool is not lit or highlighted to show that it is active. Anyone?
Oct 10, 2004 #2 SBaugh Mechanical Mar 6, 2001 6,686 You have to first have a solid before you can use the cut. Second you have to provide it a direction. That's what that pink box is below the distance is. You provide a plane or a sketched direction and the 3D sketch will follow. Regards, Scott Baugh, CSWP http://www.3dvisiontech.comhttp://www.scottjbaugh.com faq731-376 Upvote 0 Downvote
You have to first have a solid before you can use the cut. Second you have to provide it a direction. That's what that pink box is below the distance is. You provide a plane or a sketched direction and the 3D sketch will follow. Regards, Scott Baugh, CSWP http://www.3dvisiontech.comhttp://www.scottjbaugh.com faq731-376
Oct 10, 2004 Thread starter #3 sageman Industrial Feb 25, 2003 6 Hey Scott, I do have a solid that the sketch is on but the cut is inactive, I have now closed the sketch but the cut tool remains unactive. How do I give it a direction if the tool is inactive? Chris. Upvote 0 Downvote
Hey Scott, I do have a solid that the sketch is on but the cut is inactive, I have now closed the sketch but the cut tool remains unactive. How do I give it a direction if the tool is inactive? Chris.
Oct 11, 2004 #4 SBaugh Mechanical Mar 6, 2001 6,686 Try using the Tools\Sketch tools\Check sketch for feature when in the sketch. Regards, Scott Baugh, CSWP http://www.3dvisiontech.comhttp://www.scottjbaugh.com faq731-376 Upvote 0 Downvote
Try using the Tools\Sketch tools\Check sketch for feature when in the sketch. Regards, Scott Baugh, CSWP http://www.3dvisiontech.comhttp://www.scottjbaugh.com faq731-376
![[pc2]](/data/assets/smilies/pc2.gif "[pc2] [pc2]")