Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Warning: NB Cracking down on Font Size

Status
Not open for further replies.

steris

Mechanical
Joined
Nov 7, 2007
Messages
171
Location
US
Hi All,

Just an FYI - font size must be >=8 for regular text or >=7 in tables for all forms submitted to the NB. We just had NB return 100+ U1 reports back to us because the font size used was too small. We've been using the same font sizes for 10+ years without any issues. According to our AI this is a new thing that NB is cracking down on. Unfortunately they never sent out any sort of notice to manufacturers. So now we have to spend a few days to retype and re-sign all those forms. Just a heads up for everyone else...
 
Have you considered filing your reports online using the NB forms on their website?
 
Good point. We have considered it but we also do a lot of P2A forms which are not available for EDT. Our QA manager didn't want to implement different systems for different forms.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top