WCS's color

[aszepesi]

Could I set the colors of the axis for the WCS?

Attila Szepesi
support engineer
graphIT Ltd.

http://www.graphit.hu

 

[JohnRBaker]

No. The color scheme is the same as that being used in several other CAD systems and were choosen so as to comply with this albeit, de facto 'standard'.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.

 

[Toost]

John, Isn't there a tweak for color blindness ?
( somewhere there is a very faint bell ringing on this.)

 

[JohnRBaker]

Not really. We used to supply a pair of alerternative color tables which controlled the color of the objects being CREATED in UG/NX which would show a NON-color-blind person what something would LOOK LIKE to a color-blind person (there was a table for both the common Red/Green color-blindness as well as the more rare Yellow/Blue condition) however they were not intended to make the system easier to use by someone who was color-blind, but rather were provided to help the rest of us appreciate what a color-impared person would see if he looked at your models or drawings.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.