Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
welding 310SS with 316SS fluxcore
- Thread starter haiger
- Start date
Hi
Doing a quick dilution calculation with assumed parent and consumable chemistry the resulting weld material will have approximately 5% ferrite. At 760deg C (1400 deg F) you may form some sigma which will reduce the notch toughness at ambient. Given your description since this “plug” is acting as a “plug” things should be ok.
Doing a quick dilution calculation with assumed parent and consumable chemistry the resulting weld material will have approximately 5% ferrite. At 760deg C (1400 deg F) you may form some sigma which will reduce the notch toughness at ambient. Given your description since this “plug” is acting as a “plug” things should be ok.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
