WELDMENT CUTLIST ISSUE

[colt4522]

I have been trying to modify the decimal precision in the weldment cut list length column. I have tried to fix the units on both the drawing and the assembly, and I have tried to save a new cutlist and load from that but I still can't modify the length column. anyone got a better idea on how to fix this issue?

I have attached a view of the cutlist so you all can see the issue in the length column.

Colton, CSWA
Solidworks 2009
PDM Enterprise 2009
Dell Precision T7400

 

[brengine]

Change the units in the Part file.

 

[colt4522]

I have changed the units in the part file and the assembly file and the drawing file and I still get the same outcome.

Colton, CSWA
Solidworks 2009
PDM Enterprise 2009
Dell Precision T7400

 

[Eltron]

Did you do a CTRL-Q after changing the unit decimals in the drawing?

Dan

http://www.eltronresearch.com

Dan's Blog

 

[brengine]

After changing the units, maybe you need to re-insert a new table?

 

[Eltron]

Shouldn't have to. Forced rebuild worked for me.

Dan

http://www.eltronresearch.com

Dan's Blog

 

[colt4522]

even with a force rebuild it will not let me change anything. I think it is something to do with the cut list formating. I cant even click on a cell to change anything.

Colton, CSWA
Solidworks 2009
PDM Enterprise 2009
Dell Precision T7400