Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

why do I lose section view lines when creating a section view form a broken view

Status
Not open for further replies.

golfdogdave

Aerospace
May 5, 2014
4
Why do I lose the section view lines when I create a section view from a view with break lines/
 
Replies continue below

Recommended for you

What version of NX are you running? According to the following threads, it appears some progress has been made in NX 8.

thread561-307518
thread561-341871
 
I'm able to create the section view but once the view is placed the section line disappeares.
 
And you should be getting an on-screen notice of that fact.

This is a known issue but one that we have not yet addressed, mostly due to the fact that the priority is not very high since it appears that 'Section' views of 'Broken' views are considered a non-standard Drafting practice.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor