Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Why pig traps have 2 barrels?

Status
Not open for further replies.

suraiya

Materials
Feb 9, 2002
24

In most pig trap design that I've encountered, there a 2 pig trap barrels, a major barrel and a minor barrel, connected with a reducer.

Why do we need two barrels? Can't it be just long single size barrel?
 
Replies continue below

Recommended for you

The smaller pipe will be the same diameter as the pipe to be pigged, the larger pipe will be the catcher to enable the pig to be retrieved without the need to pull the pig through the pipe. It would also collect anything that the pig cleaned. Otherwise the pig would either be stuck in the pipe or if there was an open end, the pig would fly out.
 
Launch and receiver, period. Stephen A is correct.

Kenneth J Hueston, PEng
Principal
Sturni-Hueston Engineering Inc
Edmonton, Alberta Canada
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor