Rizzajohnny
Electrical
- Nov 5, 2024
- 1
Hi all, newbie here
I forgot to take a photo of how the wiring was connected when I disconnected them and now I can’t for the life of me figure out how to wire them back up.
I cannot find any wiring diagram for this particular model and make of motor. So if you guys could help me out, I would appreciate it.
I’ve checked continuity and Ohm’d the wires out and the problem I seem to have.
When I checked continuity, all the wires were connected to each other, which, in my limited knowledge find that hard to understand. I’m going to attach my notes as well as the nameplate.
Please let me know if you need any more information that I would be able to provide. Thanks again for all you guys’ support and opinions. Have a wonderful day.
I forgot to take a photo of how the wiring was connected when I disconnected them and now I can’t for the life of me figure out how to wire them back up.
I cannot find any wiring diagram for this particular model and make of motor. So if you guys could help me out, I would appreciate it.
I’ve checked continuity and Ohm’d the wires out and the problem I seem to have.
When I checked continuity, all the wires were connected to each other, which, in my limited knowledge find that hard to understand. I’m going to attach my notes as well as the nameplate.
Please let me know if you need any more information that I would be able to provide. Thanks again for all you guys’ support and opinions. Have a wonderful day.
