Recent content by bamia

Thank you TugboatEng. I will get that info tomorrow. I am curious about the end assembly that houses the bearing. It looks like the cap that is bolted to the barrel houses the bearing and seal. Does this assembly has a name that I may use to search for drawings to understand it's design. Thanks

Image 3https://files.engineering.com/getfile.aspx?folder=49f7d220-7a6b-49c8-988d-e583ad1f6a39&file=3.jpg

Image 2https://files.engineering.com/getfile.aspx?folder=5a12556c-70b6-47c9-8997-761fbc0cf052&file=2.jpg

Hello everyone. Another bearing question. Same conveyor system but this time the pulley bearing that I am curious about. OEM instruction is to grease every 1-2 weeks by pumping grease until we see new grease coming out. So the question is coming out of what? How do I know that the seal is...

Romke, do you have recommendation for ultrasound grease gun; specific make that has good track record. Thanks

An oil expansion chamber.

I have e circuit, power supply to Murr-Mico to a Wago Potential Distribution Module. What is a potential distribution? Thank you.

Thank you Jay. I meant the round thing with a yellow sticker on it and a hose coming out of it. The other image has the hose bolted to the motor flange. Not sure if that is a motor or a gearbox device. Thanks

Thank you everyone.

One more picturehttps://files.engineering.com/getfile.aspx?folder=34eeaf66-aa29-47c9-bff5-f91bdadb6ae2&file=IMG_20221111_201041.jpg

Hello everyone, What is this attached and connected to the gearbox? Thankshttps://files.engineering.com/getfile.aspx?folder=e41e247b-3945-453b-85d1-82770c05a887&file=IMG_20221111_201055.jpg

Good point, it was right on schematic. RLW-060003 , a reactor.

Hello Everyone, What is this thing on the bottom of the VFD? The output of the VFD go to it, the black wires, and then from there it is wired to the motor, the brown, black and grey wires laying on the bottom and are yet to be connected. Thanks

Thank you everyone. @TugboatEng , we are using Fluke thermometer. The machine has been recently commissioned and they're still ironing out few bugs so the conveyors (3 for now and one coming online soon) are running only when the machine runs.

Hello everyone, I have a conveyor that is supposed to run 24/7, though it is now running nor more that 10 hours per day, and I would like recommendations for monitoring and maintaining two Plummer blocks with roller bearings (I believe shaft size is 70mm). There are grease nipples, so that's...