I don't know what argument you're trying to make. Anyone that works with this will know nozzle and injector are used interchangeably. These parts require calibration so the actual nozzle on the injector is not sold separately. The number in OP's picture is the trim code which determined during...
Do not use wax. Waxes will cause crevice corrosion. Use an acidic cleaner. Citric acid works well. If you want something in consumer packaging, boat wash products are typically oxalic acid based.
The corroded CT pic is obviously fake because it follows the corrosion patterns of a painted...
Yes, the coating can be rejected if it fails to meet the standard.
If you can identify areas where the coating is more likely to have insufficient thickness you should target those areas in your testing. You're not doing yourself a favor if you tailor your inspection procedure to pass the part...
Yes, by increasing the machinery weight you reduce the cargo capacity because the weight of the vessel is limited by load line. Ferries such as technically don't have a load line.
You haven't told us the alloy that you are using. Brazing iron, steel, and stainless alloys are typically going to require silver contents of 45-56%. Silver allows are available down to 3%. Also, there are boron modified fluxes that help when brazing steel and stainless steel alloys. These...
If using carbon steel pipe in corrosive service the weld seam is anodic to the rest of the pipe. This will result in rapid failure without galvanic protection. Ed brought up a point that I was unaware of. If the pipe is annealed that there may be less of a different in galvanic potential. I have...
Well, they could be producing fissile materials for their rowdy neighbors. That could definitely make the reactors more profitable.
Or, it gives them more flexibility over oil production. OPEC can cut oil production without impacting domestic prices as much.
I think this pilot has some clout on this forum for his level headed takes. He has a discussion on the bomb cyclone that is about to hit the PNW.
Pilots need to be acutely aware of weather. He says there is nothing unusual about the current weather. What is really interesting is that he...
Waross, weight determines the number of wheels required on a truck. Weight determines the displacement of a boat. Displacement is measured volume. A boat must be physically larger to support more weight, a truck does not necessarily need to be.
