HI there,
now i am facing a problem about the pressure drop in ball valve. our company produce a kind of ceramic ball valve against high corrsion and high temp, which was inquried by a mid-east petrochemcial company. the engineer ask for the pressure drop of our reduced ball valve. the ball...
the technical specification in brief below:
Ball Valves, flanged ends raised face, threaded seat ring, controlled hardness, Body A216 WCB, regular port, ball SS 304.
Now I am very curious about the threaded seat ring used in big size(2"~16") ball valve manufacturing? because I rarely find this...
1. thanks for you info, our company so far aims to process 24" ceramic product, for instance, ceramic tube or ceramic ring. so the processing range is from 1/2" to 24", anticipate someone could provide some useful manufacturer info about this kind linear cutting manchine. thanks a lot!
2. In the...
Hi, our company is planning to purchase a professional linear cutting machine for precisely processing the structural ceramic products according to our engineer's drawing. Hence, anybody can help to provide some useful info or recommend some manufacturer of this sort of linear cutting machine...
At the same time, is there anybody can provide some material to introduce this coal to oil technology? which country now plays the main role in this field? I heard from the internet that this technology is quite new, few country can handle this application. Thanks!
As I know, one of Chinene province is cooperating with SASOL for setting up a joint venture to pursue the Coal to Oil programme, but the inventment budget is incredibe high! Normally, the investment on the coal to oil pragramme is 6~9 times of conventional refinery investment equivalently. So...
Thanks so much for you guys kind reply. i just found out that the pressure differential between the upstream and downstream as follows:
Pressure for the control valves installed:
1) At condensate discharge line from compressor plant dust collectors and from condensate collector of pig...
Is there anybody acquainted with the calculation of valve flow rate, the parameters at hand as follows:
1.Nominal diameters of control valve DN 50, DN 80, DN 100
Working media: gas condensate with water, methanol and
2. mechanical impurities of size up to 100 microns
3. Density, kg/m3...
I just wanna search the common 316 SS mechanical properties in the internet, but i failed to get the ideal result. So I turn up here for the help with respect to the following items:
1.Compressive Strength
2.Fracture Toughness
3.Impact Toughness
4.Flexural Strength
or more information will be...
Our company just did a very simple experiment about the thermal shock resistance of ceramic ball. the procedure like:
ceramic ball with Temp.15 C, put it into a furnace with Temp. 200C, then increase the temp. to 250C with 25 minutes, open and pick out the ceramic ball after keeping temp. 250C...
I just got a requirement from my end-user about providing the ceramic test report in terms of
1.Thermal Shock Resistance (50F~500F)
2.Compressive Strength
3.Fracture Toughness
4.Impact Toughness
5.Flexural Strength
Now i am facing the issue about the Thermal shock resistance test method. Is...
I just need an english version paper about the introduction of GATE VALVE, better it's a academic one. actually this is special for a guy of my colleague's younger brother as reference. Anticipate and appreciate anyone could help. Thanks in advance.
Is there anybody could come up with some idea about below valve material, or some related reference detail. Because i really have no idea about these valve material. Thanks a lot in advance!
1. BODY: 60K FORGED-DD-PSL2 TRIM: A182 F6A
2. BODY: 45K FORGED-BB-PSL2 TRIM: A182 F6A
To israelkk, the ceramic ball valve working condition like:
300F
350 GPM
50PSI
28% Aluminum Chloride
1% free acid 1% undissolved solids
Makes Alumina TriHydrate with the balance being water.
In reference to your explanation above, the quick changed temperature from 30F to 300F will not change...
is there anybody has done some thermal shock experiment about the ceramic lined valve, especially ceramic ball valve?? The customer is very concerned about thermal shock to go from 30F to 300F immediately. can the ceramic material lined in the valve outlive in this dramatically changed...
you can reach www.shengkai.com/en for the ceramic ball valve. Hope this website will be your solution. Or you can email to andybear513@hotmail.com for the electronic brochure of ceramic ball valve (material:zirconia+alumina ceramic)
anekial, each anti-abrasive valve you are using costs 23,000.00 USD? what kind of valve looks like? do you have the exact working condition, please share them with people here! As stanier commented above, slurry has many parameters, so please pop up your working condition in detail. Anyway, you...