Search results for query: *

Is there a way to change units on the fly in NX12? In the past you could change it under analysis tab-units. That is no longer there. Help please! We get files that are metric, but our shop wants to measure values in inches. I would like to leave the native file metric and not convert the...

Does anyone else have an issue with Mold Wizard stock size listing the diameter but changing the number to the radius? We have not been able to nail down when or why. It doesn't do it every time or every file, or even every part in the BOM of the same file. We use the same seed file for every...

Hi All, where I am at we are on NX 8.0.3.4 It is split here weather we go now to 10 or wait for 11. Any thoughts. Thanks, Jim T

Can someone tell me if the electrode function is a separate license than moldwizard? Can't run that function and we get an error that we can not figure out. "A callback argument can not be found" This is the first time we have tried to use this function. The icon on the main moldwizard tool...

John, Actually the MW numbers don't match any standard that I find. That is part of the issue. Jaime, Thanks, found the Thread_Standard_Dat sheet. Now just need permissions changed so I can change the file. Glad to here I am new and improved. Good luck keeping FOBU in line. Give him as...

Our programmers here are using a program to recognize our tapped holes. I am getting in trouble because the Mold wizard tap drill is not the same as the UG tapped hole function. How do I change the Mold Wizard file to match the UG standard tap drill for tapped holes? Thanks in advance for the...

You know this is a simple statement that shows I get stuck in one direction some times. "Why not create a new Inch start part and start your parts in the proper units?" Thank you looslib. The fact is, the wrong units where applied because I directly opened a parasolid or stp instead of...

I use the ug_convert_part.exe Here is the bat program I have pointing to it. @echo off set PATH=%PATH%;UGII_ROOT_DIR% %UGII_ROOT_DIR%\ug_convert_part.exe -in %1 Pause Thanks for the help. Jim T

Where I work, we are working on nx 8.0.3.4. I have been using the UG conversions file to get a file from mm to inches. Now I have NX 10 loaded on my computer. If I use the conversion program it spits the new inch file out in 10, but I still need to work in 8. Is there a way to change this...

Hi guys, I was just going thru this with my fellow designers at work for making transitions better. Where or what is fill surface? I was using bridge surface, or thru curves. Is there something better? Thanks. Jim T NX 8.0.3.4

Hi John, Used interpart link browser last week, worked great. This week, it says "available in gateway", I open gateway and it says not available. So confused. I found the relationship browser, but it says can not find Wave license. I am assuming we do not have that bundle. Help. what am...

You are the man John! I figured it had to be there somewhere. Yes I just wanted to break the links, not remove them or the rest of the history. I found the interpart link browser. Worked great. It was currently hidden. I can not find the Relationship browser. Where is that? Thanks again.

Thanks gani009, but I am trying to keep the history if possible. Doing that also loses all the taps. I have to go back and redo all my tapped holes with a symbolic thread.

Is there a simple way to break all the links in an Assembly? For years I have used UG and created what I call a proper tree. I am at a new company and have been told that I cannot have geometry linked between parts. Don't ask, I have been told and will do as I am told ( trust me I fought as...

I have been on UG for the past 13 years. The last training I went to was freeform modeling in 2006. What or where can I go to learn "best practices" for things like the "reuse library" and other changes and advancements? I look at the courses offered and have been thru most of them way back...

"You are the Man" John. Thanks for the follow-up and the .bat file. Worked like a charm.

I am working in NX8.0.3.4 Why is it that when I edit object display to change a face color it asks if I want to turn on translucency? I always have to click NO. But there is a "yes always" button. If I mess up and hit the yes always, because I happen to get click happy, then I am stuck with...

I have had this issue with water lines in my tool design and have always ended up add a symbolic thread to the missing end. I would also like to know what you find out. Currently using NX 8