Hello. We have a movement on the issue. After replacing all boards and cables / SSIF, LASERIF, DIOSSI / we already have a result. The machine does not turn on and off when asked, but now cannot create a vacuum. Up to 30 mBAR. Now I expect BISTRONIC to send me new seals and I will replace all of...
Good afternoon, Mr. Krug. Today I looked at the CNC cabinet, and did not understand what exactly is the input module. I photographed what I guess it is. If this is the module, then on the first point about SHUTTER, I have to look at output one if it is indicated. Therefore, I have to run a cable...
Hello again. Before you answered me, I tried pressing the locale button and the chassis started at minimum power. I tried to cut, but there was no beam. Where can I find the schematic numbers? Is it possible for me to contact you via WhatsApp?
Hello Mr. Krug. Seeing one of your posts, I changed one of the items in the MMC menu from MCC / SSC to MCC, but the result is the same. The HV error disappeared but the chassis continued to go...
The ssif cable.
Maybe I need to change something in the software settings of the machine? Set the machine to run in manual mode?
Thankshttps://files.engineering.com/getfile.aspx?folder=3db2a00f-c1f0-4511-bd72-6abb357fb8cf&file=WhatsApp_Image_2020-08-03_at_08.57.41.jpeg
The board canfigurationhttps://files.engineering.com/getfile.aspx?folder=65c2f3e2-ba0f-4458-98ec-844b64d5cb1a&file=WhatsApp_Image_2020-08-03_at_08.57.40_(4).jpeg
The HV desk screenhttps://files.engineering.com/getfile.aspx?folder=6e3fa140-a5ce-42de-9c86-8934bdb7478b&file=WhatsApp_Image_2020-08-03_at_08.57.40_(1).jpeg
The hv desk errorhttps://files.engineering.com/getfile.aspx?folder=a27821fc-9db6-4ca9-830d-3b52ba8ce320&file=WhatsApp_Image_2020-08-03_at_08.57.40_(3).jpeg
Hello Mr. Krug. Separating the sssif board from the main board and putting it in step mode, the machine makes a mistake, the chassis does not start and there is no beam in the resonator
Hi, looking at the diagram, do I have to completely remove the board from the socket or just disconnect the cable? Attached are pictures of HV DESK, with the configuration of the boards.
Thanks again for your...
Hi Mr. KRUG. I want to thank you for your cooperation and quick response. I did what you say, but in this case HV shows that the laser is ready and the monitor changes the error constantly. In the video you can see what is happening on the monitor. The red light on the traffic light flashes...
Good day to all. The problem with our BYSTRONIC 4020 Bystar machine is the following:
After loading and starting, the machine starts performing the functions "vacuum on" and "running flood" itself. There is no regularity in her actions. Two seconds "vacum on" one minute "running flood" then...
Hi, we still have the problem. But now with thinner sheets. The power in the thinner sheets is the norm, but the cut is the same. There are no splashes, the details are detached, but the cut is jagged. By the way, I had an error with ÖVER CURRENT error and decided it by changing the cable nozzle...
Hallo, if the laser is 4000 W how many is 100%. But the strange is another thing. On the morning when i cut the power is gone to 3200W, after half hour of work is gone to 3000 W, and after half hour is gone to 2700 W and is cutting all the day with 2500 -2700 W, always in 100%.
