Thanks everyone for your replies. Its time to put this puppy to rest.
I will do more research and post upon further substantial finding.
Have a great day all.
A PdM position can be held by an Engineer or a Technician.
I have a Bachelors in Business, but also hold Level I and II in Infrared Thermography (IR), Vibration Analysis (VA), Airborne Ultrasound (AE), Ultrasonics (UT).
I am well qualified in my field and at this time still working on obtaining...
Can anyone give me a link to typical "Salaries" or expected income for Vibration Analyst, Infrared Thermographer, etc. Or just for a PdM Technician for the Southern states ie. Texas
Can anyone tell me if there is a beginning standard of alarm limits or level criteria on bearings up to 75.5xrpm prior to making my own limits after further trending.What is a good starting point.
Will peakvue be the same or slightly different?
dgallagher,
What is the website for the H.VIR Comet windows that are avaliable for non-intrusive inspections. Square-d ? or H.VIR Comet? I would like to look into this for cost evaluations,etc.
Thanks
Thanks for the info and I will heed your advice and look into the literature suggested by you two.
Hopefully I can start off the day with some progress with these good proven methods.
We started a Pdm program from ground zero with baselines,etc..
We have gathered up to at least 5-8 sets of readings with CSI RBMWare software.
I am needing some advice as far as how to determine what the alarm levels should be set at and what steps to take to acheive great results.
We have a 65 deg. lens from Flir Systems for PM/SC, and does anyone know of any problems that might accompany this new lens as far as internal setups /software / report building, etc.??
I am in need of some assistants on getting some info forresearching and installing IR ports for inspection of power cabinets. We will recieve our lens to do this from flir systems. I was wondering if some type of knockouts would work without breaking any codes.
anything will help, thanks alot...
Looking to find any info on IR non-intrusive inspection ports for MCC's at hydro-power plants.
Are there any standards and/or procedure pertainning to this subject or information on specs and requirements.
Can I get some info on some contacts for non-intrusive IR inspection ports to be used with a 65deg. lens.
One sample I recieved from a vendor of our camera runs at $75 a pop... a little high.
any suggestion would be highly apprciated and considered.
Uncertain on the size of the lens that would...
I am starting to document my experience in the NDT feild and was advised to put down all the hrs/certs/training on Vibrations Analysis, Infrared Thermography, Ultra Thickness, Dye Penetrant, Acoustic Emissions. I was told that for future reference and certification purposes, this was going to be...