3D CAD for HVAC?

[gmensing]

Hi,

Does anyone know of 3D CAD software which can be used for HVAC design (both for designing the individual ducts as well as the layout of connected ducts in buildings.

Regards,

G. Mensing

 

[pardal]

Hi.
look at

http://www.asvic.com.au

for mech Q software, they have a HVAC 3d soft to draw all you need, it does not do calculus.

gabriel

 

[Nate360]

What type of 3D software do you have access to?
I know that AutoCAD 2000 has standard symbols and parts that you can .dxf into 3D software.
X-)

 

[juan2025]

Hi

I know that AutoCad2000 has several tools inder to help with your needs

Regards
Juan

 

[ruma]

look at

http://www.lindab.com,

they have a HVAC 3d software program namwd CADvent to draw and calculate all you need, and it is free.

 

[pardal]

Hi Ruma:

I reach at lindab.com , I download the software but they are a demo runing as a video, it can not be done nothing on it.
May be you know how tu run its.

Best regards.

 

[ruma]

Hi designeratorder
I think you have to register before you can download the full and functionally version.
Best regards
Ruma

 

[pardal]

Hi Ruma: I did not see any registration place to fill.

Does you have such registered soft, and was the registration free?

Regards

Gabriel

 

[MEPguide]

Check out Autodesk Building Mechanical at

http://www3.autodesk.com/adsk/section/0,,860342-123112,00.html

James Sledd

 

[ruma]

Hi designeratorder
Look at

http://www.lindab.com/ITCenter/eng/usergroup/Default.htm

On this site you can register.
Best regards
Ruma

 

[gmensing]

Hi Ruma,

I tried several times (last week and today again), but when I fill out the registration form, all I get is an error message. I don't know why, but I do know that my country is not on the list (Hong Kong). I will try to contact Lindab directly to see whether there is something wrong on their side or on my side.

Regards,

Gert