Acoustic Simulation FEMAP

[emanuello]

Hello,

I would like to know how to define the CD=-1 in the GRID definition (nodes), by using FEMAP. It is necessary in order to carry out an Acoustic simulation of a Fluid Cavity.
Thank you very much in advance!

 

[jbrackin]

Use the Modify/Update Other/Node Type menu

After picking the nodes, you will see a menu to select the node type, choose fluid

 

[emanuello]

Thank you very much! Do you mean the selection "type" for the nodes in the "node parameter" menu?
In my version this menu has these alternatives are only: O.Node , 1.Scalar Point, 2.Extra Point. No possibility for a -1.Fluid definition.

 

[jbrackin]

What version of Femap are you using?

Under node type you should see the following:

 

[emanuello]

I'm using the version 10 in 32bit. It must be the problem