Nov 11, 2019 #1 sxz Mechanical Aug 16, 2005 40 0 0 CA Hi, I have a nozzle reinforcement calculation. As per the UG-37, the area replacement rule, Aa < Ar, it fails, but WRC or FEA results pass. Can I use the WRC or FEA result for fabrication? Thanks.
Hi, I have a nozzle reinforcement calculation. As per the UG-37, the area replacement rule, Aa < Ar, it fails, but WRC or FEA results pass. Can I use the WRC or FEA result for fabrication? Thanks.
Nov 14, 2019 1 #21 david339933 Industrial Jun 15, 2011 1,204 0 0 CA Ok, the old order before design gamble. Can you put internal projection? Even 1" should do. Upvote 0 Downvote
Nov 14, 2019 Thread starter #22 sxz Mechanical Aug 16, 2005 40 0 0 CA Yes, it works. It is a better option than adding a repad. Upvote 0 Downvote