Apr 24, 2008 #1 skeets44 Civil/Environmental Mar 27, 2006 6 When must you use a beveled washer? Is an angle spec'ed out that is allowable between bolt head and bottom of surface. Please see attachment.
When must you use a beveled washer? Is an angle spec'ed out that is allowable between bolt head and bottom of surface. Please see attachment.
Apr 24, 2008 1 #2 rb1957 Aerospace Apr 15, 2005 15,976 what does a 40lbs piece of plate, 2'x10', have to do with a washer ? Upvote 0 Downvote
Apr 24, 2008 Thread starter #3 skeets44 Civil/Environmental Mar 27, 2006 6 Wrong attachment, sorry. Try this one http://files.engineering.com/getfile.aspx?folder=7ca6e340-5c3e-4ba9-848e-da7db20a3307&file=3038_001.pdf Upvote 0 Downvote
Apr 24, 2008 1 #4 Rjeffery Civil/Environmental Sep 15, 2002 332 AISC Steel Construction Manual 13th edition. Page 16.2-40 6.1.1 When the outer face of the joint has a slope greater than 1:20... The best way to test something is to squeeze it, slowly, until it breaks! Upvote 0 Downvote
AISC Steel Construction Manual 13th edition. Page 16.2-40 6.1.1 When the outer face of the joint has a slope greater than 1:20... The best way to test something is to squeeze it, slowly, until it breaks!
