Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cold weather engineering Alaska/Canada design

Status
Not open for further replies.

jplay2519

Structural
Oct 7, 2014
100
Anybody know of good references for permafrost and cold weather design? Does Alaska have a state building code with guidance once these? does the Canadian code have guidance on this? I'll probably order a copy of both but want to ensure I'm getting something that will help me learn about the design.
 
Replies continue below

Recommended for you

I don't think you'll get around (nor should you want to get around) working with a geotechnical engineer specializing in foundation design for permafrost.

Cold weather design alone is much simpler. Still you'll need geotechnical input to determine frost depth, adfreezing forces, soil lateral stiffness, etc.
 
There are numerous publications, associations, etc. with lots of information out there. This Google search is just a start.
Canadian publications on cold constructing
 
The USACE design guide manual TM 5-852-1 through 5 has a complete look at Arctic construction from a military (and general) standpoint.
Dave

Thaidavid
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor