Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

COVID-19 and free PDH's 8

Status
Not open for further replies.

bridgebuster

Active member
Jun 27, 1999
3,964
If you need some free PDHs to break up the monotony of self-isolation:

AISC is offering NASCC: The Virtual Steel Conference, April 21-24, up to 18 PDHs

Link

The Short Span Bridge Association in association with the American Galvanizers Association is offering "The Shelter in Place" webinar series. It started last week but there's still time to get 6 PDH's for free.

Link
 
Replies continue below

Recommended for you

I had to buy a bunch at the end of March to get compliant with my first state renewal that required PDH on a short cycle. The content was horrible. This would have been a much better option.
 
@azcats - out of curiosity, which company did you use? My employer allows us 6 paid PDHs through Red Vector. I've done a few through them over the years; some courses are better than others. I still prefer live webinars, Hilti, American Concrete Pipe Association, ConTech, etc.
 

Thanks SRE, forgot about that one.

Here's one from Skyline Steel on 4/28
Link

Some webinars from National Precast Concrete Association - more on the civil side of things.
Link

One on pipe floatation from the American Concrete Pipe Association
Link
 
If you need some free PDHs to break up the monotony of self-isolation:

AISC is offering NASCC: The Virtual Steel Conference, April 21-24, up to 18 PDHs

Is it open to people who aren't AISC members? (Thanks for the info by the way.)

 
WARose - NASCC and the link SRE posted are open to all
 
Unfortunately, the AISC webinar tomorrow - that SlideRuleEra linked to above - is full.
Annotation_2020-04-15_105747_uiqfdw.png
 
@BrentG - if you want my registration for Structural Stability, let me know where to send it.
 
Anybody know how to access the seminar next week (the AISC, 18 hr deal)? As it stands, I just got a e-mail confirming registration......I assume they might send something later?
 
@radiocontrolhead - let me know if you're still interested.
 
WARose - in case you hadn't found it yet, they explain it in the FAQ. You just go to the schedule page when the session is about to start and there will be a button to join. Enter your info (has to match the info you provided at registration) and you start watching.
 
Thanks PhamENG. I don't see the join button yet.....but I assume it will be up by tomorrow.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor