Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Fig UCS-66.2

Status
Not open for further replies.

david339933

Industrial
Jun 15, 2011
1,204
0
0
CA
Folks,

Is tr in Fig UCS-66.2, the UG-27/UG-28 calculation (ta in UG-45) or final tUG-45? If it is UG-27/UG-28, can it be below UG-16 Minimum value?

Thanks.
 
Replies continue below

Recommended for you

Status
Not open for further replies.
Back
Top