Apr 12, 2011 #1 jacksonfem Structural Dec 8, 2010 52 How I can run an analysis with Femap, using other solver than NxNastran?. For example with Ansys solver...
How I can run an analysis with Femap, using other solver than NxNastran?. For example with Ansys solver...
Apr 12, 2011 #2 ThomasH Structural Feb 6, 2003 1,192 Select a different solver when you create the analysis set an go from there. I haven't tried Ansys specifically but I can't see any reason why i shouldn't work Good Luck Thomas Upvote 0 Downvote
Select a different solver when you create the analysis set an go from there. I haven't tried Ansys specifically but I can't see any reason why i shouldn't work Good Luck Thomas
Apr 13, 2011 Thread starter #3 jacksonfem Structural Dec 8, 2010 52 It appears a message like "Enviroment variable ANSYS_EXE haw not been defined for solver". I attached an image below..... http://files.engineering.com/getfile.aspx?folder=9f78c81a-f516-420e-9cd4-465958b46bd0&file=ANSYS-SOLVER.jpg Upvote 0 Downvote
It appears a message like "Enviroment variable ANSYS_EXE haw not been defined for solver". I attached an image below.....
Apr 13, 2011 #4 namklof Structural Mar 3, 2007 23 See section 8.3.3 in the help manual. Upvote 0 Downvote
Apr 14, 2011 Thread starter #5 jacksonfem Structural Dec 8, 2010 52 Thanks! I read that....so I suggest I must install Ansys software to run it. Upvote 0 Downvote
