May 2, 2019 #1 Trent5791 Mechanical Feb 12, 2014 108 0 0 US How would you model the blue web path shown in the image? Thank you! Thank you, Trent NX 11.0.1.11 https://files.engineering.com/getfile.aspx?folder=b6f71746-3ce8-47e4-b3f2-22b91ef754dd&file=ELTURNER_Wendestange_neu-01-01.png
May 3, 2019 #2 Ehaviv Computer Jul 2, 2003 1,012 0 0 IL I would try by wrap the two Edges lines around the sloped Cylinder Upvote 0 Downvote
May 3, 2019 #3 Ehaviv Computer Jul 2, 2003 1,012 0 0 IL The two edges lines of the strip around the sloped cylinder in the angle shown. Upvote 0 Downvote
May 3, 2019 #4 Ehaviv Computer Jul 2, 2003 1,012 0 0 IL Clarification. Its 4 lines in 2 are in right angle in the other 2. Upvote 0 Downvote
May 3, 2019 #5 Toost Mechanical Jan 18, 2011 2,949 0 0 SE Using the Sheet metal application, it's a "bend" feature. The centerline of the bend 45degrees and the bend angle 180 degrees. Regards, Tomas Upvote 0 Downvote
Using the Sheet metal application, it's a "bend" feature. The centerline of the bend 45degrees and the bend angle 180 degrees. Regards, Tomas
May 3, 2019 Thread starter #6 Trent5791 Mechanical Feb 12, 2014 108 0 0 US I was thinking sheet metal was going to be the easiest option. Thank you for confirming Tomas! Thank you, Trent NX 11.0.1.11 Upvote 0 Downvote
I was thinking sheet metal was going to be the easiest option. Thank you for confirming Tomas! Thank you, Trent NX 11.0.1.11
May 6, 2019 #8 mmauldin Bioengineer Jul 16, 2004 484 0 16 US Since I don't have sheet metal, I would do something like this: https://files.engineering.com/getfile.aspx?folder=8f1b2058-a462-47dc-b5df-74b8a11c5e6a&file=belt_turn.prt Upvote 0 Downvote
May 7, 2019 #9 Ehaviv Computer Jul 2, 2003 1,012 0 0 IL According the last post I see that enough to wrap 2 edges. Because the 2 others give the same Wrap result. Upvote 0 Downvote
According the last post I see that enough to wrap 2 edges. Because the 2 others give the same Wrap result.
