Hydraulic Press - Ram Design

[mechie2k]

Hello Everyone

I need to design few RAMS that will attach to a hydraulic press to install sleeves/bushing in various parts.

I want to attach the sleeve/bushing to the RAM so that the Axis of the RAM and Sleeve/Bushing is concentric, and hence use it as a guide.

I am confused on the type of fit between the Ram and sleeve and also design - shape/form of the ram, the total runout is about .001

Any suggestions?

thanks

 

[budt]

DON'T.


Bud Trinkel, Fluid Power Consultant
HYDRA-PNEU CONSULTING

 

[Pressed]

If this is what you are talking about, they sell the complete units and the separate components.

[URL unfurl="true"]http://www.daytondiecushions.com/Photo_Gallery.htm[/URL]

===================================
Forging

http://mech.e.tripod.com

-------------------------------------------------
Ddraig Breuddwydia....

http://www.tailofthedragon.com