ISO / DIN hardware specs

[PROEGUY]

posted in the ISO group as well

i'm trying to develop a CAD library of metric "mil spec" hardware. I’ve found out that there isn't a mil spec for metric hardware...SHCS, FHCS, washers, nuts, hex bolts etc.
is there a spec for this type of application, either ISO or DIN and where can i find such. the specs that i've found are broken down into categories w/ numbering nomenclature and i don't know what i'm looking at or what to search for. i have to build the CAD libraries and i don't know what to name the models so that they show up correctly on our BOM's. can any point me in the right direction?
TIA


Sr. Pro/E Mechnaical Designer

 

[CoryPad]

Your question isn't entirely clear, but for ISO metric fastener product standards, start here:

http://www.iso.org/iso/iso_catalogue/catalogue_tc/catalogue_tc_browse.htm?commid=521627

If metric aerospace fastener standards are important, go here:

http://www.iso.org/iso/iso_catalogue/catalogue_tc/catalogue_tc_browse.htm?commid=46538

 

[PROEGUY]

thanks for the links. that's what i was looking for

Sr. Pro/E Mechnaical Designer