Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

L410 bag into prop

Alistair_Heaton

Mechanical
Nov 4, 2018
9,757

That would have been a bit of thump and yaw.

To note I can only presume it came from the forward hold.

The door being open or opening on that would be more of a concern to me than a soft bag doing what it did.
 
Replies continue below

Recommended for you

The blades I think are alloy Macaulay props. They are pretty sturdy like the Jetstream.

The prop itself might be ok after NDT.

The gear box, shear spline and a few other things behind it likely not ok.
 

Part and Inventory Search

Sponsor