Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Large stroke 100+ Ton cylinders?
- Thread starter tfro
- Start date
Looks like Enerpac has 200-ton and up cylinders with up to 48" stroke.
Click on "General Purpose" under "Cylinders"
Click on "General Purpose" under "Cylinders"
- Thread starter
- #3
Take a look at the Hydraulics and Pneumatics Magazine web site's "Designers Guide"
You will find many cylinder manufacturers that go well above 12" Bore.
The home page of this site has all the information you will ever need when it comes to Fluid Power.
Bud Trinkel, Fluid Power Consultant
HYDRA-PNEU CONSULTING
You will find many cylinder manufacturers that go well above 12" Bore.
The home page of this site has all the information you will ever need when it comes to Fluid Power.
Bud Trinkel, Fluid Power Consultant
HYDRA-PNEU CONSULTING
Off highway equipment use large bore long stroke cylinders. The pressure you are going to operate at will have an effect on bore size and cost.
The Danzco, Inc. link below will provide some information about custom cylinders. If you just need one and want used, look at companies that wreck construction equipment.
Ed Danzer
The Danzco, Inc. link below will provide some information about custom cylinders. If you just need one and want used, look at companies that wreck construction equipment.
Ed Danzer
- Status
